Support Kalenji : Notices, questions fréquentes et dépannage - Home > Watches > W Kalenji 300

Find support for your product

Home > Watches > W Kalenji 300

Help
Electronics

Advice
Shoe care

Guides
for product choice

Running's Files

Watches W Kalenji 300 8132642

Frequently asked questions

Setting the time and date

In Time mode:

- Press "Reset" for 3 seconds, the seconds start flashing
- Change the number of seconds using the "Start/Stop" button
- Press "Mode" to switch to setting the hours
- Change the number of hours using the "Start/Stop" button
- Press "Mode" again and the minutes start flashing
- Change the number of minutes using the "Start/Stop" button
Follow the same procedure to change the date: day, month, year.

Have you found the answer to your problem?

Oui

Non

Activating/deactivating the alarm and/or the hourly beep

To activate/deactivate, you must select an alarm from 1-5 (EL button):
- Once you have selected an alarm, press "Start/Stop" to activate/deactivate.

- Alarm is not selected (the display reads ":00") you can activate or deactivate the hourly beep. This function is activated using the Start/Stop button. A symbol with a ray of half rings (alarm) appears under the bell

Once the hourly beep function is activated, there will be a beep every hour.
The counter from 0 to 59 is for the minutes. It is set to 00 by default, which means that the hourly beep will ring exactly on the hour.
If you set the counter to 5, the hourly beep will ring every hour at 5 minutes past the hour.

Have you found the answer to your problem?

Oui

Non

Setting the alarm

- Press "Mode" to access alarm mode ("AL"). 5 alarms can be programmed. The "EL" button allows you to move from alarm 1 to 5.
- Press "Reset" to make the hours start flashing and "Start/Stop" to change the number
- Press "Mode" to make the minutes start flashing and "Start/Stop" to change the number.
- Press "Reset" to finish changing the settings

Press "Mode" to leave the alarm mode

Have you found the answer to your problem?

Oui

Non

Using the stopwatch

- Select the stopwatch: "SP" using the "Mode" button
- Press the "Start/Stop" button to start/stop the stopwatch
- Press "Reset" to put the stopwatch back to zero

Have you found the answer to your problem?

Oui

Non

Using the countdown

- Select "Lap Counter": "TR"
- Press the "Reset" button, the hours start flashing
- Change the number of minutes using the "Start/Stop" button
- Press the "Mode" button to set the number of minutes, confirm by pressing "Reset". (Perform the same procedure to set the seconds)
- Press the "Start/Stop" button to activate/deactivate countdown.

Have you found the answer to your problem?

Oui

Non

Use in water

This watch is water resistant to 5 ATM. It can be used in pools at surface level. It should not be used for diving and underwater swimming at the bottom of the pool.
In addition, (like most watches) water resistance is not guaranteed if buttons are pushed while the watch is underwater.

Have you found the answer to your problem?

Oui

Non

Download the user guide

Notice en

ou